Re: Microphone "Buzz"

[an error occurred while processing this directive]

Posted by Bluzharper on December 14, 2001 at 08:52:30:

In Reply to: Microphone "Buzz" posted by BloozDaddy on December 12, 2001 at 19:56:51:

: Seeking assistance with another Microphone problem. I replaced the element/cartridge on an old JT30. Soldered one wire from element to connector and from element to the inside of the shell for the ground. I plug in and get a terrible "Buzz/Humming" sound. Only way to stop it is if I hold on to where the microphone cord connects to the mic connector. I set up my Green Bullet this same way and it works fine!
: Help!!!......Thanks, "BloozDaddy"

Switch the wires to start with. I would guess you may have a bad connection on the other end. With the 1/4 " jack you have a center wire, and an outside braided shielding wire which is ground...
Good Luck.........Bluz

Follow Ups:

Post a Followup




Optional Link URL:
Link Title:
Optional Image URL:

[an error occurred while processing this directive]