Posted by Shaggy on March 14, 2002 at 13:57:12:
In Reply to: Re: Maintenance posted by JazzHarp on March 14, 2002 at 12:15:47:
: Remove the cover plates and switch them. Should work then.
Not if the high and low notes are still at their respective correct ends of the harp and just the blow and draw are reversed. It sounds to me like he's switched the reed plates around. He should, therefore, remove the reed plates and switch them back.
When taking a harp apart, it is important to keep track of which part is which. The reed plates are not the same. You need to make sure you put them back the right way.
Post a Followup